- 107 -- 107 -
5. Recording settings - Main Assist Functions
Main Assist Functions
This section describes the main assist functions that are convenient when recording.
●
The [Custom] ([Monitor / Display]) menu has display assist functions such as the center marker. ( 188 / [Custom]
menu ([Monitor / Display]))
[Image Stabilizer]
Set the image stabilizer operation to match the recording situation.
●
When using a lens with an O.I.S. switch, set the switch on the lens to ON.
●
When you use a lens with no connection function with the camera, [Image Stabilizer] cannot be selected.
●
When you use a lens without the stabilizer function, [Operation Mode] cannot be selected.
[MENU/SET]
[ ] [ ] Select [Image Stabilizer]
[Operation
Mode]
[Normal]:
Corrects vertical, horizontal, and rotational camera shake.
This function is suitable for normal recording.
[OFF]:
Turns the in-lens image stabilization function OFF.
[E-Stabilization
(Video)]
During video recording the 4 types of camera shakes, the vertical, horizontal, pitch, and yaw axes is
corrected through the combined use of the in-lens and electronic image stabilizers.
●
When [E-Stabilization (Video)] is working, the [ ] of the recording screen will be switched to [ ].
●
When set to [ON], the angle of view may become narrower.
●
The image stabilizers to be activated differ depending on your lens.
●
When the following functions are being used, [E-Stabilization (Video)] is not available:
– [Digital Zoom]
– [Variable Frame Rate]
– [Live Cropping]
To Next Page
Loading...
