Panasonic DC-BGH1

- 39 -- 39 -
3. Basic Operations - Display Settings
Display Settings
The recording information or menu screen will only be output to either the HDMI output destination or SDI output destination.
Information Display (HDMI/SDI)
You can set the output destination of recording information or menu screen. The default setting is set to [AUTO].
[MENU/SET] [ ] [ ] Select [Info Display (HDMI/SDI)]
[AUTO]
Only displays to the external device connected via HDMI. When it is not connected via
HDMI, it will be displayed on the external device connected via SDI. (when [SDI Output] is
[ON]).
[HDMI] Only displays to the external device connected via HDMI.
[SDI] Only displays to the external device connected via SDI. (when [SDI Output] is [ON]).
[OFF] Neither will be displayed.
●
For external devices not set in the output destination of the information, the whole screen or part of the screen will be
displayed in black depending on the setting screen.
●
By pressing [Fn1], you can switch the settings of [Info Display (HDMI/SDI)] in the order of [AUTO], [HDMI], [SDI], and
[OFF].
– [Info Display (HDMI/SDI)] is assigned to the [Fn1] at default setting.
– About Fn buttons ( 154 / Fn Buttons)
●
When the menu screen is not output to the external monitor, you can reset the [Info Display (HDMI/SDI)] settings to
[AUTO] by pressing [MENU/SET], [Q.MENU], and [Fn3] at the same time.