- 86 -- 86 -
5. Recording settings - Metering / Exposure / ISO Sensitivity
Exposure Compensation
You can compensate the exposure when the correct exposure determined by the camera is too bright or too dark.
You can adjust the exposure in 1/3 EV steps in a range of ±3 EV.
1 Display the exposure compensation screen.
●
[MENU/SET] [ ] [ ] [Exposure Comp.]
2 Compensate the exposure.
●
Rotate .
3 Confirm your selection.
●
Press [MENU/SET].
●
If you set the ISO sensitivity to [AUTO] when [Exposure Mode] is set to [M], you can compensate the exposure.
●
The set exposure compensation value is stored even if you turn off the camera.
●
The standard value for correct exposure can be adjusted:
[
] [ ] [Exposure Offset Adjust.] ( 186 / [Exposure Offset Adjust.])
To Next Page
Loading...
