Panasonic DC-BGH1 - [Custom] Menu ([Lens; Others])

- 192 -- 192 -
11. Menu Guide - [Custom] menu
[Fan Mode]
[AUTO1] / [AUTO2] / [NORMAL] / [SLOW]
Sets fan operation.
[AUTO1]: The fan operation switches automatically according to the temperature of the camera. This setting prioritizes
controlling rises in temperature in the camera.
[AUTO2]: The fan operation switches automatically according to the temperature of the camera. This setting prioritizes
reducing fan noise.
[NORMAL]: The fan operates constantly at a standard speed.
[SLOW]: The fan operates constantly at low speed.
[Tally Lamp]
[Front Tally Lamp]
[H] / [L] / [OFF]
[Rear Tally Lamp]
[ON] / [OFF]
This sets the operation of the tally lamp.
[Custom] menu ([Lens / Others])
: Default settings
[Lens Focus Resume]
[ON] / [OFF]
The camera saves the focus position when you turn it off.
[Power Zoom Lens]
[Step Zoom]
[ON] /
[OFF]
[Zoom Ring]
[ON] / [OFF]
Sets the screen display and operation when using an interchangeable lens compatible with power zoom. (
84 / [Power
Zoom Lens])
[Lens Fn Button Setting]
[Focus Stop] / [AF Mode] / [Focus Ring Lock] / [AE LOCK] / [AF LOCK] / [AF/AE LOCK] / [AF-ON] / [AF-ON : Near Shift] /
[AF-ON : Far Shift] / [Focus Area Set] / [Image Stabilizer] / [No Setting] / [Off (Disable Press and Hold)] / [Restore to Default]
Sets the function to be assigned to the focus button of an interchangeable lens.
●
You can call up the assigned function by setting the focus selector switch of a compatible interchangeable lens to [Fn]
and then pressing the focus button of the lens.
●
When [Focus Stop] is used, the focus is locked while the focus button is pressed and held.