- 231 -- 231 -
12. Remote Operations - Wi-Fi Connections
Wi-Fi Connections
●
When [Wi-Fi] has been selected in [New Connection] under [LAN / Wi-Fi Function] from [LAN / Wi-Fi] of the [Setup] ([IN/
OUT]) menu, select the connection method from either [Via Network] or [Direct] to connect.
On the other hand, when you use [Select destination from History(Wi-Fi)] or [Select destination from Favorite(Wi-Fi)], the
camera connects to the selected device with the previously-used settings.
[Via Network]
Connect the camera and an external device through the wireless access point.
1 Select the method for connecting to a wireless access point.
Settings: [WPS (Push-Button)] / [WPS (PIN code)] / [From List]
●
After selecting [Via Network] once, the camera will connect to the previously-used wireless access point. To change the
wireless access point used for connection, press [Fn1] and change the connection destination.
●
Check the operating instructions and settings of the wireless access point.
To Next Page
Loading...
