Panasonic DC-BGH1 - Synchronizing the Time Code with an External Device

- 64 -- 64 -
4. Recording Videos - Synchronizing the Time Code with an External Device
Synchronizing the Time Code with an External
Device
Synchronize the time code default value with an external device that supports time code signal input and output.
Preparations for Time Code Synchronization
When [Count Up] is set to [FREE RUN], you can synchronize the initial value of the time code with an external device.
A
B
C
A
[TC IN/OUT] terminal
B
BNC cable (commercially available)
C
External devices
1 Set [Count Up] to [FREE RUN].
●
[MENU/SET] [ ] [ ] [Time Code] [Count Up] [FREE RUN]
2 Connect the camera and external device with a BNC cable.
●
When connecting a BNC cable to the [TC IN/OUT] terminal, use one that is less than 2.8 m (9.1 feet).
It is recommended to use a double shielded BNC cable equivalent to 5C-FB.