Panasonic DC-BGH1

- 5 -- 5 -
Information for Your Safety
Cautions for Use
●
Do not use any other AC mains leads except the supplied one.
●
Use a high speed HDMI cable (Type A - Type A plug) that is compatible with 4K and has an HDMI logo.
●
For the USB connection cable, use one that is a shielded product with a ferrite core compliant to USB Type C (USB3.1) that
is less than 1.5 m (4.9 feet).
●
When connecting a BNC cable to the [GENLOCK IN] terminal or [TC IN/OUT] terminal, use one that is less than 2.8 m (9.1
feet). It is recommended to use a double shielded BNC cable equivalent to 5C-FB.
●
For the cable that connects to the LAN terminal, use the one below.
LAN cable (STP (Shielded Twisted Pair), category 5e or above, maximum 100 m (328 feet))
●
Do not use the Headphone cables with the length of 3 m (9.8 feet) or more.
●
Do not use the Stereo microphone cables with the length of 3 m (9.8 feet) or more.
Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games
etc.).
●
If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave
radiation.
●
Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound.
●
Recorded data may be damaged, or pictures may be distorted, by strong magnetic fields created by speakers or large
motors.
●
Electromagnetic wave radiation may adversely affect this unit, disturbing the pictures and/or sound.
●
If this unit is adversely affected by electromagnetic equipment and stops functioning properly, turn this unit off and remove
the battery or disconnect AC adaptor. Then reinsert the battery or reconnect AC adaptor and turn this unit on.
Do not use this unit near radio transmitters or high-voltage lines.
●
If you record near radio transmitters or high-voltage lines, the recorded pictures and/or sound may be adversely affected.
●
To clean your camera, remove the battery or a card, or disconnect the power plug from the outlet, and wipe with a
soft, dry cloth.
●
Do not press the lens with excessive force.
●
Do not allow camera to come into contact with pesticides or volatile substances (can cause surface damage or
coating to peel).
●
Do not keep rubber or plastic products in contact with the camera for a long period of time.
●
Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the camera, since it may
deteriorate the external case or the coating may peel off.
●
Do not leave the camera with the lens facing the sun, as rays of light from the sun may cause it to malfunction.
●
Always use the supplied cords and cables.
●
Do not extend the supplied cord or cable.
●
The data on the card may be damaged or lost due to electromagnetic waves, static electricity or breakdown of the camera
or the card. We recommend storing important data on a PC etc.
●
Do not leave any metal items (such as clips) near the contact areas of the power plug or near the batteries.