Numbered
buttons
PAGE A, •
ENTER
Info
After plugging the unit into your household AC outlet and then
pressing [_, DVDNHS POWER] to turn the unit on for the first time,
the unit starts language, TV aspect type and TV Guide On Screen ®
system setup.
TV Guide On Screen ® system
This unit features the TV Guide On Screen ®system that provides an
8-day grid of TV programs available in your area. Use the TV Guide
On Screen® system to choose TV programs and simplify the
recording of your favorite TV shows (4 32, 35-39). Best of all this
service is free!
• The first few days of listings usually appear within 24 hours after a
successful Setup. It may take up to six days for the full eight days
of program listings to appear.
• In order to cool the circuits used when downloading the program
listings, the cooling fan may sometimes operate when the unit is
turned off. This is not a malfunction.
IhV_l',Lo];]llf;1_i i
• The TV Guide On Screen ®system must be set up whether it
is then used or not. You cannot use the scheduled
recording feature unless this setup is completed.
eTV Guide On Screen system is supported by selected DISH
network and DirecTV receivers, using 480i mode.
• DirecTV/DISH Network service is only available in the
United States.
elf you are using a satellite service other than DirecTV, you
cannot receive the program listings on this unit. Without
this information, program-based recordings cannot be
made. However, recordings can still be set manually.
Preparation
Turn on the television and select the appropriate video
input to suit the connections to this unit.
oWhen using the cable box or DirecTV receiver, check the following.
- Make sure the IR Blaster is connected and positioned properly
(4 17).
- Make sure the cable box or DirecTV receiver is turned on.
Press [(b, DVD/VHS POWER].
Press [A, T] to select the language and then
press [ENTER].
• If you make a mistake, press [RETURN] to return to an earlier
screen.
Press [A, T] to select "4:3 TV" or "16:9
Widescreen TV" and then press [ENTER].
TV Guide setup begins.
eOnly English is displayed in the TV Guide On Screen ®
system. Other languages cannot be displayed.
_ _ad_ e_sy
Press [ENTER].
Following the on-screen messages, input the operating
environment for your television.
@
@
• Select "Next" and then press [ENTER] to go to the next screen.
• Select "Back" and then press [ENTER] to return to the previous
screen.
Set the country (USA/Canada)
Whichcountryis your DVDRecorderlocatedin?
Canada
Set the ZIP (Postal) code
Pleaseenterthe51digitZiPCode•hereYoUrDVDRecorderislocated;
@ Set the service(s) being used.
• You can select up to 2 services.
Press [A, Y] to select the service being used and press
[ENTER]. If you want to select 2 services, press [A, V] to
select one more service and press [ENTER].
• If you selected "Cable with a Cable Box" or "DirecTV', then
also set and select "Antenna".
• If you cannot choose the service you use, then select
"Antenna", and continue. Then, after exiting the "Set Clock and
Channels Automatically" screen in step 8, press [ENTER],
continue and press [RETURN]. After this step, perform "Set
Clock Manually". (4 25)
i
Pleaseselectwhichservice(s)yeawouldlikey0urTVGuideOnScreenTM to
supp0rt(checkallthatapply):
Cable without a Cable Box
Cable with a Cable Box
DirecTV
DISH Network
To learnmore about the setup contents of various services, see
the list on the next page.
%
o,_
e,4
m
RQT8346
To Next Page
Loading...
