|!
FUNCTIONS
RETURN
rrr_ i_ p'a
oYou can use SD Memory Cards with capacities from 8 MB to 2 GB
(4 7).
oStill pictures recorded on CD-R or CD-RW cannot be copied.
While stopped, put the card in the SD slot, and the menu (4 below)
is automatically displayed.
Press [&, Y] to select "Copy pictures" and then press [ENTER].
Then go to step 4 on page 67, "Copying all the still pictures on a
card--Copy all Pictures".
Press [RETURN] to exit the screen.
Set the recording mode.
olf you are not going to change the recording mode, press [_']
(4 step 6).
(_ Press [A, T] to select "Mode" and then press [1_].
_ Press [&, Y] to select "Content Type" and then press
[ENTER].
(_ Press [A, V] to select "Picture" and then press
[ENTER].
"Recording Mode" is automatically set to "High Speed".
(4_ Press [_1] to confirm.
Register still pictures for copy.
• If you are going to copy a registered list without making any
changes to it (4 step 7).
You can register still pictures or still picture folders.
• Still pictures and folders cannot be registered on the same list.
Copy
• To register individual still pictures
Press [&, T] to select "Create List" and then press [1_].
Press [A, V] to select "New Entry" and then press
[ENTER].
Press [&, Y, _1, I_] to select a still picture and then
press [ENTER].
• To select a multiple number of items together, press
[11, PAUSE] to add the check mark and then press
[ENTER] (4 67, Multiple editing)
• To show other pages (4 67)
• To select the still pictures in another folder (4 67)
• To edit the copying list (4 67)
You can register a multiple number of still pictures on
the copying list by repeating steps _ to _.
Press [_1] to confirm.
• To register on a folder by folder basis
Press [A, V] to select "Create List" and then press [1_].
Press [&, Y] to select "Picture/Folder" and then press
[ENTER].
• You cannot copy still pictures recorded on CD.
While stopped
Press [FUNCTIONS].
Press [&, V] to select "Other Functions" and
then press [ENTER].
Press [&, V] to select "Advanced Copy" and
then press [ENTER].
Copy
@
• If you are not going to change the registered list press [Y]
several times (-) step 7).
Set the copy direction.
• If you are not going to change the copying direction, press [Y]
(-) step 5).
O_ Press [&, T] to select "Copying Direction" and then
press [1_].
_ Press [&, Y] to select "Source" and then press
[ENTER].
_ Press [&, V] to select the drive and then press [ENTER].
_4_Press [&, Y] to select "Destination" and then press
[ENTER].
_5_Press [&, V] to select the drive and then press [ENTER].
The same drive as the copy source can be selected.
@ Press [41] to confirm.
Press [A, V] to select "Folder" and then press [ENTER].
Press [&, Y] to select "New Entry" and then press
[ENTER].
Press [&, Y] to select the folder and then press
[ENTER].
• To select a multiple number of items together, press
[11, PAUSE] to add the check mark and then press
[ENTER] (-) 67, Multiple editing).
• To show other pages (-) 67)
• To switch to another higher folder (-_ 67)
• To edit the copying list (-) 67)
You can register a multiple number of folders on the
copying list by repeating steps _ to _.
Press [41] to confirm.
Press [A, V] to select "Start Copying" and then
press [ENTER].
• For individual still pictures only
When specifying another folder as the copying destination,
select "Folder".
Press [41, I_] to select "Yes" and then press
[ENTER] to start copying.
RQT8346