DRIVE SELECT -
ENTER
FUNCTIONS
RETURN
• You can use SD Memory Cards with capacities from 8 MB to 2 GB
(4 7).
While stopped
Press [FUNCTIONS].
Press [&, V] to select "Other Functions" and
then press [ENTER].
_l_'_ FUNCTIONS Cal@idge Protection Off
_DVD-RAM Disc Protection Off
U Press [A, T] to select "HDD Management",
"DVD Management" or "Card Management" and
then press [ENTER].
e.g.,
Preparation
• Press [DRIVE SELECT] to select the DVD drive.
After performing steps 1 to 3 (4 left)
Press [A, V] to select "Disc Protection" and
then press [ENTER].
Press [41, I_] to select "Yes" and then press
[ENTER].
_,E_Qo
The lock symbol appears closed when the disc is write-
protected.
For a DVD-RAM with a cartridge
eWith the write-protect tab in the protect position,
play automatically starts when inserted in the unit.
Switch the write-protect switch to the "LOCK" position.
(You cannot provide a name finalized discs.)
You can provide a name for each disc.
Preparation
• Press [DRIVE SELECT] to select the DVD drive.
• ITt_;ll Release protection (4 above).
After performing steps 1 to 3 (-,) left)
Press [A, T] to select "Disc Name" and then
press [ENTER].
4 73, Entering text
eThe disc name is displayed in the DVD MANAGEMENT window.
el_l _ _ _ _ With a finalized discs the name is
displayed on the Top Menu.
• FJ'_rjl The disc name is displayed only if you play the disc on other
equipment.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
RQT8346
To Next Page
Loading...
Need help?
General
