_icm
ENTER
- FUNCTIONS
- RETURN
While stopped
Press [FUNCTIONS].
Press [A, y] to select "Other Functions" and
then press [ENTER].
Press [A, _'] to select "Setup" and then press
[ENTER].
Tabs Menus Options
Press [&, T] to select the tab and then press
[m,.].
Press [A, V] to select the menu and then press
[ENTER].
Press [A, y] to select the option and then
press [ENTER].
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
Note
There may be differences in operation methods. If this happens,
follow the on-screen instructions for the operation.
The settings remain intact even ifyou switch the unitto standby.
Channel
Setup
TV Guide Settings
Set the TV Guide On Screen ® system.
Signal Source (RF IN) 3
Select to suit the type of antenna you are using.
Set Channels Automatically _,_2(4 79)
Preset Channel Captions "2 "_3(4 80)
Manual Channel Captions "2.3 (4 80)
VCR Plus+ Ch. Setting "2 .3.4
Off Timer
Select how long the unit remains on when it is not being used,
Remote Control Code (4 26)
Clock Settings
Press [ENTER] to show the following settings.
Set Clock Automatically "_,2 (4 79)
Set Clock Manually _(4 25)
Adjust Time Zone _5 (4 79)
DivX Registration
Displays the unit's registration code. You need this registration
code to purchase and play DivX Video-on-Demand (VOD)
content.
Restore Default Settings
This returns all values in the Setup menus, except for the clock,
channel settings, ratings level, and on-screen language, to the
default settings.
• Antenna eCableTV
e2 Hours e6 Hours
eSet Code 1 eSet Code 2
• Off
• Set Code 3
• 1 •0 •+1
• Yes •No
1You need to set these menus only when you do not use TV Guide On Screen _>system. These menus turn gray and become un-selectable
after this unit downloads the program listings.
+2 You can set these menus only if you connect an antenna or cable without a cable box.
+3 These menus turn gray and become un-selectable after TV Guide Setup is completed.
+4 This menu turns gray and become un-selectable if you connect a DISH Network.
+5 You can set these menus only after "Set Channels Automatically" is completed.
RQT8346
To Next Page
Loading...
