Getting started
VQT3F56
16
Common Operations
1 Turn on the TV, then select the appropriate
AV input to suit the connections to this
unit.
2 Press [Í] on the remote control or [Í/I]
on this unit.
The Easy setting will start at the initial power on after
purchasing this unit. (> 18)
≥When indicator on this unit's display blinks, do not
turn off the unit or remove the media. Such action may
result in loss of the media's contents.
≥When inserting a media, ensure that it is facing the right
way up.
≥Wipe off the dust or fingerprints from the discs before
use. (> 3)
≥Return discs to their cases or cartridges after use; this
helps to protect the discs against scratches and dust.
≥When removing the SD card, press on the centre of the
card and pull it straight out.
≥If you connect a Panasonic product with a USB connection
cable, setup screen may be displayed on connected
equipment. For details, refer to the instructions for the
connected equipment.
∫ To select a drive
Press [DRIVE SELECT] to select the media drive that you
operate.
∫ Release disc protection
[RAM]
If the disc is protected when writing to the disc, release the
protection (> 64, Setting the protection).
The HOLD function deactivates all buttons on the unit and
remote control.
To cancel the HOLD function
Press and hold [OK] and [RETURN ] simultaneously until
“X HOLD” disappears.
Preparations
Turning on this unit
TIME SLIP
DISPLAY
STATUS
SETUP
AUDIO
-10s +60s
REC MODE
REC
TEXT STTL
CHAPTER
F
U
N
C
T
I
O
N
M
E
N
U
D
I
R
E
C
T
N
A
V
I
G
A
T
O
R
G
U
I
D
E
RETURN
PLAY/x1.3
PAUSE
PAUSE LIVE TV
STOP
SLOW/SEARCH
SKIP
PROG/CHECK
CH
PAGE
SELECT
INPUT
CH
AV
TV
DRIVE
SELECT
DEL
BYGR
EXIT
OK
OPTION
VOL
0
2
abc
5
jkl
8
tuv
1
4
ghi
7
qrs
p
3
def
6
mno
9
xyz
w
F Rec
MANUAL SKIP
Inserting or removing a media
HOLD function
Press and hold [OK] and
[RETURN ]
simultaneously until
“X HOLD” appears on
the unit’s display.
Press [< OPEN/CLOSE] on
the main unit to open the tray
and insert a disc.
USB memory
SD card
DMRXW385GL-VQT3F56_eng.book 16 ページ 2011年2月8日 火曜日 午後4時38分