Convenient functions
VQT3F56
74
Changing the unit’s settings
¾ Deep Colour Output
This setting for selecting whether to use Deep Colour
output when a TV that supports Deep Colour is
connected.
¾ HDMI Audio Output
Select “Off” when connected to TV with HDMI cable,
and connected to amplifiers not compatible with HDMI
with a DIGITAL AUDIO OUT terminal.
¾ Contents Type Flag
Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that
supports Contents Type Flag is connected.
¾ VIERA Link
Set to use “HDAVI Control” function when connected
with an HDMI cable to a device that supports “HDAVI
Control”.
≥Select “Off” when you do not want to use “HDAVI
Control”.
∫ Network Easy Settings
Press [OK] to start Network Easy Settings. (> 19)
∫ Network Settings
¾ IP Address / DNS Settings
Check the connection of the network or set the IP
address and DNS.
≥Press [OK] to show the respective setting.
¾ Proxy Server Settings
Check and set the connection to the Proxy server.
≥Press [OK] to show the respective setting.
¾ Internet Content Settings
¾ Lock
You can restrict using VIERA CAST.
≥Follow the on-screen instructions.
≥PIN is required to change. (> 67)
¾ Automatic Volume Control
Volume that is different depending on the contents is
adjusted automatically to the standard volume while
using the VIERA CAST.
≥Depending on contents, this function will not work.
≥Select “Off” when the audio is warped.
Network
≥ “Connection Speed Setting" is enabled only when “Connection
Speed Auto-configure” is turned “Off”.
Setup
Network
Network
Network Easy Settings
Network Settings
Network
Network Settings
Network Settings
Proxy Server Settings
Internet Content Settings
Home Network ( DLNA ) Settings
IP Address / DNS Settings
Server ( DLNA ) Settings
Network Settings
Internet Content Settings
Internet Content Settings
Automatic Volume Control
Lock
DMRXW385GL-VQT3F56_eng.book 74 ページ ２０１１年２月８日 火曜日 午後４時３８分
To Next Page
Loading...
