Panasonic DMR-XW385

Convenient functions
VQT3F56
72
Changing the unit’s settings
∫ Digital Audio Output
¾ PCM Down Conversion
Select how to output audio with a sampling frequency
of 96 kHz.
≥It will be converted to 48 kHz regardless of the setting
in following cases.
– The signals have a sampling frequency of over
96 kHz.
– The disc has copy protection.
≥If “Off” is selected, signals are output as 96 kHz
≥If “On” is selected, signals are converted to 48 kHz.
(Choose when the connected equipment cannot
process signals with a sampling frequency of 96 kHz.)
¾ Dolby Digital
¾ DTS
¾ MPEG
Select the audio signal to output.
∫ Audio Type for XP Recording
Choose the audio type when recording or copying with XP
mode.
≥The picture quality of LPCM recordings may be lower than
that of normal XP mode recordings.
≥The audio recording becomes Dolby Digital even if you
selected LPCM when using a recording mode other than
XP.
∫ Audio Type for Digital Broadcast
If the programme has more than one track (Dolby Digital,
MPEG, etc.), you can set priorities.
≥This setting will give effect in the following conditions.
– The default setting when watching broadcasts.
– The default setting when playing back the title recorded
in DR mode.
– DR File Conversion (> 39)
– Normal speed copy from the title recorded in DR mode.
(> 41, 43)
∫ Audio for HG / HX / HE / HL / HM
Recording
If the programme has multi channel audio, priority is given to
what you select.
≥This setting will give effect in DR File Conversion. (> 39)

≥ Select “PCM” when the connected equipment cannot decode the
respective audio format.
≥ Not making the proper settings may result in noise.
Sound
Digital Audio Output
Digital Audio Output
Dolby Digital
DTS
MPEG
PCM Down Conversion
DMRXW385GL-VQT3F56_eng.book 72 ページ ２０１１年２月８日 火曜日 午後４時３８分