Recording
VQT3F56
27
You can make timer programme for current or next
programme.
1 While watching a programme
Press [STATUS ].
2 Switch the programme with [2, 1].
3 Press the “Yellow” button.
4 Go to step 3 on page 26.
≥You cannot change “Channel” and “Day/Date”.
Press [INPUT SELECT] or [WXCH] to display the
programme that you want to stop recording on the TV
screen while 2 programmes are simultaneously recording.
1 Press [∫].
e.g.,
2 Select “Yes”, then press [OK].
If you have already set a weekly/daily timer recording,
the recording will start at the next scheduled time.
≥Depending on the state of the unit, playback may stop
when recording begins.
≥Even if you should turn the unit off during the timer
recording, the recording is continued.
≥When you programme successive timer recordings to
start, last 1 minute of those programme will not be
recorded.
¾ Starting of the timer recording while executing other
operation (> 90)
¾ About 2 programme simultaneous recording (> 24)
Timer recording from channel
information
To cancel recording when timer
recording has already begun
1
All Digital Channels
10:30
NEWS
09:00 - 11:00
Now
Dolby DRating: G
Set timer
Select favourites
Stop Recording
Yes
No
Timer recording of this programme in progress.
Stop this timer recording ?
Recording [ ]
OK
RETURN
Notes on timer recording
Not recorded
Programme
Recorded Recorded
Programme
DMRXW385GL-VQT3F56_eng.book 27 ページ ２０１１年２月８日 火曜日 午後４時３８分
To Next Page
Loading...
