120
FEB 2008Ver. 1.1
DP-C405/C305/C265
2.20.1.2. IT Drive Gear (Removing the PC Board, and the Drive Unit)
<Removing the PC Boards>
(1) Remove 11 Screws (S6).
(2) Remove the Rear Cover Assembly.
(3) Remove 1 Screw (Y31).
(4) Remove the CONE PC Board (3922).
(5) Remove 12 Screws (X5).
(6) Remove all the Harnesses from the SC PC
Board.
(7) Remove 5 Clamps.
(8) Remove the SC PC Board Assembly by lifting
,
and
turning to the Left as shown by the arrows.
To Next Page
Loading...
