Panasonic DP-C405 - Page 355

355
DP-C405/C305/C265
FEB 2008Ver. 1.1
717 XMT LAN Incomplete SMTP Protocol
transmission.
Mail Server’s hard disk may be full.
Mail Server is defective.
718 XMT LAN Page Memory Overflow occurred
while receiving printing data. The
paper size selected within your
application to print is larger than the
paper size loaded in the paper
tray(s).
Check the document size, and
resolution.
Ask originator to re-send in a supported
size, and resolution.
719 RCV LAN Received data via LAN is in a
format that is not supported.
Ask the originator to re-send with a
supported file attachment:
* In a TIFF-F format.
* Image data conforming to A4/Letter
size.
720 POP LAN Unable to connect to the POP
Server.
Incorrect POP Server address is set.
POP Server is down.
721 POP LAN Unable to login to the POP Server. Incorrect User Name or Password is
set.
722 RCV LAN Failed to obtain the Network
Parameters (such as: IP Address,
Subnet Mask, Default Gateway IP
Address, etc.) from the DHCP
server.
DHCP is not available.
(Contact the Network Administrator.)
725 XMT
POP
LAN DNS Server connection timed out. Incorrect DNS Server address is set.
DNS Server is down.
726 XMT
POP
LAN Received an error response from
the DNS Server.
Incorrect POP Server address is set.
Incorrect SMTP Server address is set.
728 XMT LAN Received an Error, or No Response
from the Remote
Internet Fax. (SMTP Direct XMT)
Remote Internet Fax Errors: Memory
Overflow, or No Power.
(Retry is not possible)
729 XMT LAN Failed to authenticate (SMTP
AUTHENTICATION) when
connecting with the SMTP server.
SMTP AUTHENTICATION, User Name
and/or Password are incorrect.
(Contact the Network Administrator.)
730 RCV LAN Unable to program the Internet
parameters, or the autodialer via
Email from a PC.
Verify that the Fax Parameter #158 is
set to Valid.
731 RCV LAN Dialer full while Relayed
Transmission Request was
received.
Dial buffer for manual number dialing
(70 stations) are being used.
741 XMT,
Polling
PSTN Unable to dial Deleted the registered station name
before dialing with Timer Controlled
Communications, etc.
800 Relay
Comm.
PSTN The machine was requested to
relay a document but has no Relay
Hub capability.
814 Conf. XMT
Conf.
Polling
Relay
Comm.
PSTN The remote station does not have
Relay XMT, nor Confidential
Communication capability.
815 Conf. RCV PSTN Mailbox is full.
Fax Information Codes
Code Mode Phase Description of Problem Cause