436
DP-C405/C305/C265
FEB 2008Ver. 1.1
4.2.2. FAX Service Mode Table
The following service modes are provided to assist you in setting operational functions of the unit, and
determining the condition of the unit.
Service Modes (For Facsimile)
No. Service Mode Description
00 Not Used
01 Function Param. Setting Allows changes to the function parameters (the home
position, etc.).
02 RAM Edit Mode Factory use only.
03 Print Param List / Report Prints the Function Parameter List, Page Memory Test,
Printer Report, All Document File, Protocol Trace, and Toner
Order Form.
04 MODEM Tests Generates various binary, tonal, and DTMF modem signals.
05 Not Used
06 RAM Initialize Initialize RAM, and restore the default value of the function
parameters.
Note: Turn the Power Switch to the OFF, and back to the ON
position to enable the parameter settings.
07 Not Used
08 Check & Call Allows input of information for Service Alert Report,
Maintenance Alert Report, and Toner Order Form.
09 System Maintenance Sending a Received File during a fatal printer error.
To Next Page
Loading...
