Panasonic DP-C405

87
FEB 2008Ver. 1.1
DP-C405/C305/C265
code from the USB Port.
Now connect the USB Cable between the Unit and PC.
4) Upgrading the Main Unit's Firmware Code
Start the Local Firmware Update Tool, and select the following Parent Firmware File Folder in the
C:\Panasonic\Panasonic-FUP\Data folder. The Firmware Type window appears, and proper
Firmware Files are selected automatically by selecting the Firmware Type.
Then follow the display instructions to upgrade the Main Unit's Firmware Codes.
5) Confirmation
After the update is completed, the machine reboots itself, and returns to standby.
Confirm the F5 & F6 parameters according to the printed lists in Step 3) above if the settings are
different.
Note:
1. While updating the firmware code, the display may become garbled, however, it will return to normal
upon completion of the firmware update.
2. The suffix “_xx” for the Folder Name, or File Name may not exist depending on the destination
location.
2.11.4. Updating the Firmware using the Master Firmware SD Memory Card
If the Master SD Memory Card includes all necessary firmware as a package.
(Only one SD Memory Card is required (minimum 128 MB size) to update the SC PCB with the Standard, or
with all Optional firmware configurations.)
Caution:
Before proceeding with the Firmware Update, clear all Fax or Internet Fax jobs first, or the Firmware will
not update properly. Follow the steps below to perform All Job Clear.
1. Press the “Function”, “Copy”, and the “3” keys simultaneously on the Control Panel.
2. Input the password, and select the “OK” button to enter the Service Mode (default password is
00000000).
3. Press the “9” key on the Control Panel, and then press the “Start” key to enter the F9 Service Mode
(Unit Maintenance).
4. Select “00 FAX Service Mode” on the Touch Panel display.
5. Select “06 RAM Initialize“ on the Touch Panel display.
6. Select “09 All Job Clear” on the Touch Panel display, and then select the “Yes” button.
After clearing the jobs, the machine reboots automatically, and returns to the standby mode.
Parent Firmware File Folder Sub Firmware File Folder
\ DP-C405_C305_C265_xx_xxxxxxxx \ Sc_Std \ CMFP25SCAxVxxxxx_xx
\ Sc_Ps \ CMFP25SCDxVxxxxx_xx
\ Fcb \ CMFP1FCBAxVxxxxx_xx
\ Ec \ CMFP4_ECAAVxxxxx (DP-C405_C305)
\ Ec \ CMFP5_ECAAVxxxxx (DP-C265)
\ Scn \ CMFP2SCNAAVxxxxx
When you select the Parent Folder, the following
Firmware Type window appears. Proper Sub File Folders
are selected automatically by selecting the Firmware
Type.
The transferring order is set up automatically.