Feature Code Selection
Paper size in the
multi-purpose tray
#381 To set the recording paper size in the multi-purpose tray.
M0N “16K”
M1N “LETTER”
M2N “LEGAL”
M3N “A4” (default)
M4N “A5”
M5N “A6”
M6N “B5(ISO)”
M7N “B5(JIS)”
M8N “B6(ISO)”
M9N “B6(JIS)”
MGN “FOLIO/FS”: F4, Folio, Foolscap
MBN “OFICIO”: Mexico Oficio, India Legal
Note:
R To select the custom size (feature #391 on page 76 or feature #392 on
page 76), press MCN or MDN repeatedly to display the desired item. However,
you cannot select a custom size item if its width or length has been set to 0.
Paper size in the
lower input tray
#382 To set the recording paper size in the lower input tray.
M0N “16K”
M1N “LETTER”
M2N “LEGAL”
M3N “A4” (default)
M4N “A5”
M6N “B5(ISO)”
M7N “B5(JIS)”
MGN “FOLIO/FS”: F4, Folio, Foolscap
MBN “OFICIO”: Mexico Oficio, India Legal
Note:
R To select the custom size (feature #391 on page 76 or feature #392 on
page 76), press MCN or MDN repeatedly to display the desired item. However,
you cannot select a custom size item if its width or length has been set to 0.
R This feature will be displayed only when the lower input tray is installed
(page 106).
R If any of the following paper sizes is selected, received fax documents will be
stored in memory.
– “A5”
– “B5(JIS)”
– “B5(ISO)”
– “16K”
Paper type for the
standard input
tray
#383 To set the recording paper type for the standard input tray.
M1N “PLAIN PAPER” (default)
M2N “THIN PAPER”
Note:
R This setting will be deactivated when printing from a computer. To set the
recording paper type for printing, see page 37.
75
12. Programmable Features
To Next Page