Feature Code Selection
Automatic Caller
ID list
#216 When “ON” is selected, the unit will print the Caller ID list automatically after every
30 new calls (page 68).
M0N “OFF” (default)
M1N “ON”
Time adjustment #226 Using this feature, the unit’s date and time setting will be automatically adjusted
when caller information is received.
M1N “AUTO”: The date and time setting will be automatically adjusted.
M2N “MANUAL” (default): Deactivates this feature.
Note:
R If the time is not adjusted correctly due to a problem in Caller ID service, this
feature is turned OFF.
All address book
erase
#289 To erase all items stored in the address book.
R Disconnect the following cables before activating this feature.
– Telephone line cord
– USB cable
– LAN cable
M0N “NO” (default)
M1N “YES”
To erase all items:
1. MMENUN A MBNM2NM8NM9N
2. M1N A “YES” A MSETN
3. M1N A “YES” A MSETN A MMENUN
Paper size in the
standard input
tray
#380 To set the recording paper size in the standard input tray.
M0N “16K”
M1N “LETTER”
M2N “LEGAL”
M3N “A4” (default)
M4N “A5”
M6N “B5(ISO)”
M7N “B5(JIS)”
MGN “FOLIO/FS”: F4, Folio, Foolscap
MBN “OFICIO”: Mexico Oficio, India Legal
Note:
R To select the custom size (feature #391 on page 76 or feature #392 on
page 76), press MCN or MDN repeatedly to display the desired item. However,
you cannot select a custom size item if its width or length has been set to 0.
R If any of the following paper sizes is selected, received fax documents will be
stored in memory.
– “A5”
– “B5(JIS)”
– “B5(ISO)”
– “16K”
74
12. Programmable Features
To Next Page
Loading...
