Feature Code Selection
Paper type for the
multi-purpose tray
#384 To set the recording paper type for the multi-purpose tray.
M1N “PLAIN PAPER” (default)
M2N “THIN PAPER”
M3N “THICK PAPER”
Note:
R This setting will be deactivated when printing from a computer. To set the
recording paper type for printing, see page 37.
Paper type for the
lower input tray
#385 To set the paper type for the lower input tray.
M1N “PLAIN PAPER” (default)
M2N “THIN PAPER”
Note:
R This feature will be displayed only when the lower input tray is installed
(page 106).
R This setting will be deactivated when printing from a computer. To set the
recording paper type for printing, see page 37.
Input tray setting
for lists and
reports
#390 To set the input tray to use for lists and reports.
M1N “#1” (default): Standard input tray
M3N “#3”: Lower input tray
M4N “#1+#3”
*1
*1 These options are displayed only when the paper size (feature #380 on
page 74 or feature #382 on page 75) and the media type (feature #383 on
page 75 or feature #385 on page 76) match. If either is changed, this setting
will be changed accordingly.
Custom size 1 for
copying
#391 To customise the recording paper size for copying.
1. MMENUN A MBNM3NM9NM1N A MSETN
2. Enter the custom size width (210.0 - 216.0 mm), using the dial keypad. A
MSETN
3. Enter the custom size length (279.0 - 356.0 mm), using the dial keypad. A
MSETN
4. Enter the name of the setting, using the dial keypad (up to 8 characters).
A MSETN A MMENUN
Note:
R If you have set feature #147 to “INCHES”, the numbers are displayed in
inches.
Custom size 2 for
copying
#392 To customise the recording paper size for copying.
1. MMENUN A MBNM3NM9NM2N A MSETN
2. Enter the custom size width (210.0 - 216.0 mm), using the dial keypad. A
MSETN
3. Enter the custom size length (279.0 - 356.0 mm), using the dial keypad. A
MSETN
4. Enter the name of the setting, using the dial keypad (up to 8 characters).
A MSETN A MMENUN
Note:
R If you have set feature #147 to “INCHES”, the numbers are displayed in
inches.
76
12. Programmable Features
To Next Page
Loading...
