Panasonic DP-MB251CX - Page 82

Feature Code Selection
Web fax preview
access code
#450 To set the web fax preview access code.
1. MMENUN A MBNM4NM5NM0N A MSETN
2. Enter the password (feature #155 on page 72). A MSETN
3. Enter the web fax preview access code, up to 8 characters, using the English
alphabet and numbers (see page 53 for character entry).
R The following symbols can also be entered using M0N or M1N.
! @ # $ % ^ & ’ ) ( . - _ { }
4. MSETN A MMENUN
Fax receive notify
#451 When “ON” is selected, the computer connected to your unit using USB/LAN will
receive a notification when a fax document is received.
M0N “OFF” (default)
M1N “ON”
Note:
R When connecting to the LAN: Register computers to which fax reception
notifications will be sent through the web browser interface (page 93).
Fax to email
address setting
#452 If you wish to transfer a received fax document to desired email address, activate
this feature (page 66).
M0N “OFF” (default)
M1N “ON”
All received fax
erase
#458 To erase all received fax memory.
R Disconnect the following cables before activating this feature.
– Telephone line cord
– USB cable
– LAN cable
M0N “NO” (default)
M1N “YES”
1. MMENUN A MBNM4NM5NM8N
2. M1N A “YES” A MSETN A MSETN A MMENUN
Set fax features to
default
#459 To reset fax features to their default settings.
M0N “NO” (default)
M1N “YES”
1. MMENUN A MBNM4NM5NM9N
2. M1N A “YES” A MSETN A MSETN A MMENUN
82
12. Programmable Features