104
VQT3Y04
Indication
Problem C heck points
Rem aining battery
indication is not
displayed properly.
p The rem aining battery capacity indication is an
approximation.
If the rem aining battery capacity indication is not
displayed correctly, fully charge the battery, discharge i
t
and then charge it again.
The re m a ining time
indication or the elapsed
time indication is not
show n.
p [DISPLAY] of the [SETUP] is [O FF]. (F 40)
Recording
Problem C heck points
The unit arbitra rily stops
re c o rd ing.
p Use an SD card that can be used for motion picture
recording. (F 24)
p The recordable time may have shortened due to the
deterioration of the data writing speed or repeated
recording and deletion. Usi
ng the unit, format the SD card
or built-in memory. (F 44)
p If [AGS] is [ON], record in the normal horizontal position
or set [AGS] to [OFF]. (F 55)
Auto Focus function
does not work.
p Switch to Intelligent
Auto M ode.
p If you are trying to record a scene that is hard to bring into
focus in Auto F ocus M ode, use the M anual Focus M ode
to adjust the focus. (F 35, 62)
“E N V IRONMENT TO O
DARK, OR LENS COVER
CLOSED.” is displayed.
p Before turning on the unit, open the
lens cover.
p This m essage may also be displayed when recording in a
very dark location.
Color balance of images
is strange when
re c o rd ing in a place
such as a gym nasium .
p In a place with multiple light sources, such as a
gym nasium or a hall, set the White Balance setti
ng to
(Indoor mode 2). If you cannot record clearly with the
(Indoor m ode 2), set it to (M anual adjustment
m ode). (F 59)
Color or brightness of
the image changes, or
you may see horizontal
bars in the image.
The LCD m onitor flickers
indoors.
p Col
or or brightness of the im age may change, or you may
see horizontal bars in the im age when the object is
recorded under fluorescent light, mercury light or sodium
light, etc., but this is not a malfunction.
p Record in Intel
ligent Auto M ode or set the shutter speed
to 1/60 in areas w here the pow er supply frequency is
60 H z, or 1/100 in areas of 50 H z.
To Next Page
Loading...
