103
VQT3Y04
w It is not a malfunction in the follow ing cases
Others
Troubleshooting
A clicking sound is heard
when the unit is shaken.
p This is the sound of the lens moving and is not a defect.
This sound will no longer be heard w hen the unit is turned
on and change the m ode to .
Object seem s to be
warped.
p Object seem s to be warped slightly when t
he object moves
across the im age very fast, but this is because the unit is
using MOS for the im age sensor. This is not a malfunction.
Power
Problem C heck points
This unit cannot be
turned on.
This unit does not stay
on long enough.
Battery ru n s dow n
quickly.
p Charge the battery again to ensure it is sufficiently
charged. (F 21)
p In cold places, the battery using time becom es shorter.
p The battery has
a limited life. If the operating time is still
too short even after the battery is fully charged, the
battery has worn out and needs to be replaced.
This unit is turned off
autom atically.
p If the unit
turns off w hen you turn off the pow er to the TV
using the TV rem ote control, the VIERA Link is at work. If
you are not using the VIERA Link, set [VIERA Link] to
[OFF]. (F 78)
This unit cannot be
operated even though it
is turned
on.
This unit does not
operate norm ally.
p Remove the battery or AC adaptor, wait about 1minute
and then reconnect the battery or AC adaptor. Then
about 1 minute later, turn on the unit again. (C onducting
the above operation while the m edia is bei
ng accessed
may dam age the data on the media.)
p If normal operation is still not restored, detach the pow er
connected, and contact consum er support. (F 123, 124,
125)
“ERROR OCCURRED.
PLEASE TURN UNIT
OFF, TH EN TURN ON
AGAIN.” is displayed.
p The unit has autom atically detected an
error. Restart the
unit by turning the unit off and on.
p The unit will be turned off in about 1 minute if the unit is
not turned off and on.
p R epair is needed if it is repeatedly displayed even if it
is
restarted. Detach the pow er connected, contact
consum er support. (F 123, 124, 125) Do not attem pt to
repair the unit by yourself.
To Next Page
Loading...
