72
VQT3Y04
Dividing a scene to partially delete (iFram e)
Divide the iFram e scene, and delete unnecessary parts.
This divides the recorded scenes in two and deletes the front half or back half.
The scenes that were deleted after division cannot be recovered.
p Change the m ode to , and set [VIDEO/PICTURE] of the play m ode selection
to
[iFram e]. (F 36)
1 Select the menu.
2 Select the scene you wish to divide using the cursor button and
press the ENTER button.
3 Select to set the dividing point.
p It is convenient to use Slow -motion Playback and
Fram e-by-fram e Playback. (F 63)
p Set to at least 2 seconds for the portions to be
deleted and at least 3 seconds for the portion that
is to rem ain.
4 Select the part for deletion, then press the ENTER button.
5 Select [YES] and press the ENTER button to confirm (play back) the
part for deletion.
p A confirmation m essage appears w hen [NO] is selected.
Proceed to
Step
7.
6 Stop the playback.
p A confirmation m essage appears.
7 Select [YES] and press the ENTER button.
p To continue dividing and deleting other scenes, repeat
Step
s 2-7.
To com plete dividing
p Press the MENU button.
p It may not be possible to divide scenes with a short recording time.
p The actual division may slightly slip off the previously designated dividing point.
: [EDIT SCENE] [SPLIT&DELETE]
0h00m15s
To Next Page
Loading...
