106
VQT3Y04
VIERA Link does not
work.
(Setting on this unit)
p C onnect with a HDMI mini cable (optional). (F 78)
p Set [VIERA Link] to [ON]. (F 78)
p Turn the unit off and then back on again.
(Setting on other devices)
p If the TV input does
not sw itch autom atically, sw itch the
input using the TV rem ote control.
p C heck the VIERA Link setting on the connected device.
p Please refer to the operating instructions of the
connected device.
Cannot copy scenes on
the SD card by
connecting to other
equipm ent wit
h the USB
cable.
p Other equipm ent might have not recognized the SD card.
Unplug the USB cable once, and reconnect it.
With a PC
Problem C heck points
When connected by the
USB cable, this unit is
not detected by the PC.
p After re-inserting the SD card into the unit, reconnect the
supplied USB cable.
p Select another USB terminal on the PC.
p C heck the operating environm ent. (F 90,
98)
p C onnect the supplied USB cable again after restarting the
PC and turning on this unit again.
When the USB cable is
disconnected, an e rro r
m essage will appear on
the PC.
p To disconnect the USB cable safely, double-click the
icon in the task tray and fol
low the instructions on the
screen.
Cannot see the PDF
operating instru c tions
for HD W riter LE 1.1.
p You will need Adobe Acrobat R eader5.0 or later or
Adobe R eader7.0 or later to read the PDF operating
instructions for HD W riter LE 1.1.
Others
Problem C heck points
If the SD card is inserted
in this unit, it is not
recognized .
p If the SD card is formatted on a PC, it may not be
recognized by this unit. Use this unit to format SD cards.
(F 44)
With other products
Problem C heck points