84
VQT3Y04
3
Select the media you wish to dub, then press the ENTER button.
p When using the battery, the LCD monitor turns off after about 5 seconds. Press the cursor
button to turn the LCD monitor on.
4 Dub through operations on the Blu-ra y disc re c o rd e r or high-
definition (AVCHD) com patible DVD re c o rd er.
p Do not press the ENTER button of the unit during dubbing.
p Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)
p When this unit is connected to a Panasonic Blu-ray disc recorder or a DVD recorder using
a USB cable while the unit is turned on, pow er
is also supplied from the connected
equipm ent to this unit.
p For details on dubbing and playback methods, read the operating instructions of the
Blu-ray disc recorder or DVD recorder.
p When you connect the unit to a Blu-ray disc recorder,
a dubbing operations screen may
appear on the television connected to the Blu-ray disc recorder. In this case as well,
perform the operations of
Step
s 1 to 4.
p You cannot change the mode of the unit or turn off the unit while it is connected to a Blu-ray
disc recorder or DVD recorder. Disconnect the USB cable before performing either of these
operations.
p If the batter
y runs dow n during dubbing, a m essage will appear. Operate the Blu-ray disc
recorder to cancel the dubbing.
About the screen indication of the unit
p W hen the unit is accessing the SD card, card access icon () appears on the unit
screen or the access lam p is on.
p
When the unit is accessing the built-in memory, built-in memory access icon ()
appears on the
unit screen or the access lam p is on.
p Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is
accessing media, as this may result in the loss of recorded content.
To Next Page
Loading...
