Import/Export
Item Contents
Mode Select mode (Import / Export).
Item
Select item (All Items / Function / Single Touch Scan / Network /
Server / Information Notification).
File Setting File Name (up to 255 characters) / Password (0 to 16 characters)
For details, refer to "10.7 Import/Export" (page 97).
Backup/Restore
Item Contents
Mode Select mode (Backup / Restore).
File Setting File Name (up to 255 characters) / Password (0 to 16 characters)
For details, refer to "10.8 Backup/Restore" (page 98).
Password Settings
Item Contents
User Name Set the user name (up to 15 characters).
Password Set the password.
Notice
• Password should meet the following conditions.
– Use 8 to 16 characters.
– Use characters from at least 3 of the following categories:
Lowercase alphabet a to z
Uppercase alphabet A to Z
Digits 0 1 2 3 4 5 6 7 8 9
Symbol ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | }
• Do not use a password that can easily be guessed.
• The password should be unique. Do not use the same password for other purposes.
• Keep the password secret.
• Change the password periodically.
Note
• If you forget the user name or password, you can reset the user name and password using Factory
Reset (page 100). After Factory Reset, configure the scanner again.
7.3.6 Administrator tab
72
To Next Page
Loading...
