Panasonic KV-S1037X - Preparation of Preset Scan Mode

6.4.5 Preparation of Preset Scan mode
1. Launch Configuration Web (page 62).
2. Select the [Scan] tab, and then click [Single Touch Scan].
3. Select the [Preset Scan] for "Type" of the desired single touch scan button.
4. Click [Edit] of "Output Settings".
5. Select [Shared Folder], [FTP], or [Email] for "Output Method".
• If you select [Email], you should configure SMTP settings from [Server] tab (page 70).
• [Email] can be selected only for button 1.
6.4.5 Preparation of Preset Scan mode
58