7 Using Configuration Web
Network settings for this unit can be configured using the web browser that was launched from Network
Scanner Select Tool.
Note
• If you are using Internet Explorer 11 and "Display intranet sites in Compatibility View" is selected,
Configuration Web may not be displayed correctly.
7.1 Launch Configuration Web
1. Start Network Scanner Select Tool.
2. Select the desired scanner.
Note
• Select the check box of the scanner you use for pull scan.
3. Click [Configuration Web].
• The web browser will launch.
Notice
• When "Initial Settings" screen is displayed, set the language and/or date and time following the
instructions on the screen.
• To use Configuration Web, except for the Information tab, "User Name" and "Password" are
necessary. Set "User Name" and "Password" when the password setting screen appears. For details
about the password, refer to "Password Settings" (page 72).
7 Using Configuration Web
62
To Next Page
Loading...
