Panasonic KV-S1037X - Page 95

Installing a server certificate
1. Launch Configuration Web.
• For details, refer to "7.1 Launch Configuration Web" (page 62).
2. Open the [Network] tab.
3. Click [SSL/TLS].
4. In "Certificate Installation", click [Edit].
5. Click [Browse] in "File" and specify the server certificate file following the on-screen instructions.
Enabling SSL/TLS
1. Launch Configuration Web.
• For details, refer to "7.1 Launch Configuration Web" (page 62).
2. Open the [Network] tab.
3. Click [SSL/TLS].
4. In "Setup", click [Edit].
5. Set "Service" to [On].
6. Click [Submit].
• The scanner will restart automatically.
10.6.1 Installing a server certificate
95