Loading Documents on the ADF
22
7
Remove the document and lock the
document guide.
Slide the document guides selector in
the direction shown in the illustration
until the ( ) and ( ) marks are
aligned to lock the document guide.
8
Place the document on the hopper again and adjust the document guide according to the
size of the document to be scanned.
• Make sure to align the document pages along one side.
• Make sure that the center of the smallest sheet of the document will be fed to the center of the
paper slot.
9
Open your scanning application
*1
and scan the documents.
*1 The software Image Capture Plus, included with the scanner, can be used for scanning the documents.
1
2
1 2
To Next Page
Loading...
