To Next PageTo Next PageHow to remove moire fringes from scanned images on a Panasonic KV-S7097 Scanner?
Moire fringes (stripe or wavy pattern noise) on scanned images from your Panasonic Scanner are typically caused by the document's printing pattern interacting with the scanning resolution. Try using the moire reduction function or adjusting the resolution and rescanning.
Why isn't the green LED on when I turn on my Panasonic KV-S7097?
If the green LED doesn't light up when you turn on your Panasonic Scanner, the power cord might not be properly plugged in. Make sure to insert the power plug firmly.
Why is my Panasonic KV-S7097 ADF scanning blank pages?
If the scanned document from your Panasonic Scanner's ADF is blank, the document was likely loaded face down (upside down). Load the document correctly, and try again.
General| Optical Resolution | 600 dpi |
|---|---|
| Connectivity | USB 3.0 |
| Weight | 18.5 kg |
| Interface | USB 3.0 |
| Light Source | LED |
| Scanning Modes | Color, Grayscale, Monochrome |
| Maximum Document Size | A3 |
| Scanner Type | Sheet-fed |
| Image Sensor | CIS |
| Scanning Method | Duplex |
| Paper Size | A4 |
Uses ultrasonic sensor to detect double feeding of documents with various thicknesses.
Allows resuming scanning after double feed detection by pressing the Skip button.
Specifies the minimum hardware and software requirements for the scanner.
Provides essential guidelines for installing the scanner unit, including placement and power.
Emphasizes user responsibility for document and data management, including backups.
Instructions for scanning documents that are all the same size using the ADF.
Steps for scanning documents with varied page sizes using the ADF.
Step-by-step guide for placing documents on the flatbed glass for scanning.
Instructions for removing jammed paper from the scanner's paper slot.
Instructions for removing jammed paper from the scanner's exit path.
Detailed steps for cleaning key rollers within the ADF path.
Instructions for cleaning the drive rollers and free rollers using roller cleaning paper.
Steps for cleaning drive, free, and exit rollers using roller cleaning paper.
Procedure for cleaning ADF glass and reference plates with roller cleaning paper.
Instructions for cleaning paper sensors, waiting sensors, and double feed detectors.
Steps for cleaning the starting and ending sensors and their reflector sheets.
Instructions for cleaning the flatbed glass and flatbed sheet.
Step-by-step guide for replacing the paper feed roller modules.
Detailed procedure for removing and installing the double feed prevention roller.
Addresses issues where the scanner's green LED does not illuminate upon power-on.
Troubleshoots problems where the computer fails to detect the scanner.
Provides solutions for slow scanning performance.
Guides on resolving issues with the ADF door not opening.
