Panasonic KX-F50

Selector Settings
DIALING MODE
TONE PULSE
JA
ОЛ)
D
Ст
DIALING MODE:
If your line has touch tone service, set the selector to “TONE”. If your line has rotary
pulse dial service, set to “PULSE”.
RINGER volume:
HIGH: The ringing sound will be loud.
LOW: Тһе ringing sound will be soft.
OFF: Тһе unit will not ring.
Turning the Power Switch ON
Before turning the POWER switch on, confirm the followings:
1. The cassette tape and the recording paper are installed properly.
2. The handset is on the cradle.
Turn the POWER switch to the “I (ON)" position.
POWER
OOFF ONI
When you use the unit for the first time, the ALARM indicator will light. After
recording your outgoing message, the ALARM indicator will go out. See page 1-13.