Panasonic KX-F50

Programming а REMOTE TAD ID number for remote operation
The REMOTE TAD ID number prevents unauthorized persons from accessing your
unit and listening to your messages. The REMOTE TAD ID is preset to 111. If you
wish to change the number, you can choose any number from "1" to “999” except
numbers including “0” and "7".
PROGRAM Press the PROGRAM button.
The PROGRAM indicator lights.
Press “Ж”, then press "06" for the
REMOTE TAD ID setting.
pd fi sie add TAD ID
Cx) 9) а)
Press the SET button to store the
programming in memory.
5 Pn Press the PROGRAM button to end the
| operation.
The PROGRAM indicator goes out.
Note: You should not use codes which contain zero (0) since this causes the unit
to skip the OGM. (For example, 200, 502, 70 ес.)
We recommend that you do not use seven (7) as a code number, since this
number is used as the OGM rerecording command for remote operations.
Otherwise the answering features may not operate properly.
3-5