Panasonic KX-F50

Other Features
TONE button (Temporary tone dialing)
This
function
is
useful
only
your
line
has
a
rotary
pulse
dial
service.
Pressing
the
TONE
(є)
button
will
allow
you
to
change
from
pulse
to
tone
mode
during
a
dialing
operation,
and
enter
special
tones
and
codes
to
operate
answering
machine,
electronic
banking
services
and
other
special
services.
“TONE” can be programmed into memory with the telephone numbers.
Press the TONE (X) button.
When you hang up, the unit automatically
returns to pulse mode.
e"TONE'" can be stored in memory in the same
way as explained on page 1-20 and 1-21.
ePressing the TONE button counts as 1 digit
while programming.
FLASH button
The FLASH button is used to access special telephone services such as call waiting
and call forwarding.
For further details, please see a brochure issued by your telephone company.
Ш Using the FLASH button
1. If you are having a conversation and another party calls, you hear a tone.
2. Press the FLASH button.
The first conversation is placed on hold and you can answer the second call.
To speak to the first caller again, press the FLASH button again. The second
caller is placed on hold.
e"FLASH" can be stored in memory in the same way as explained on page 1-20
and 1-21.
ePressing the FLASH button counts as 1 digit while programming.
Combination dialing
The following combination of dialing methods can be used.
Ш Manual dialing and automatic dialing
Ш Pulse and Tone dialing
Ш Plural memory stations
3-10