Panasonic KX-F50

TAD RING COUNT FAX RING COUNT
The TAD RING COUNT setting The FAX RING COUNT setting
This function is available only in the This function is available only in the FAX
TAD/FAX mode when receiving a call. mode when receiving a document.
0: Toll Saver* 1: The unit answers on the 1st ring.
1: The unit answers on the 1st ring. (Default)
(Default) 2: The unit answers on the 2nd ring.
2: The unit answers on the 2nd ring. 3: The unit answers on the 3rd ring.
3: The unit answers on the 3rd ring. 4: The unit answers on the 4th ring.
4: The unit answers on the 4th ring.
Note:
Note: elf you find a difficulty in receiving from
elf you find a difficulty in receiving from machines that have an automatic
machines that have an automatic transmission feature, set the FAX RING
transmission feature, set the TAD RING COUNT number to “1” (once).
COUNT number to “1” (once).
Operation:
Operation:
1 Press the PROGRAM button.
1 Press the PROGRAM button. The PROGRAM indicator lights.
The PROGRAM indicator lights.
2 Press “Ж”, then press "33" for the
2 Press “Ж”, then press "32" for the FAX RING COUNT setting.
TAD RING COUNT setting.
З Press “1”, "2", "3" or "4".
Q Press "Q", “1”, "2", "3" or "4". (1--опсе, 2=twice, 3=three times,
(0— Toll Saver, 1-опсе, 2=twice, 4=four times)
3=three times, 4=four times)
4 Press the SET button to store your
4 Press the SET button to store your selection in memory.
selection in memory.
5b Press the PROGRAM button to end
b Press the PROGRAM button to end the operation.
the operation. The PROGRAM indicator goes out.
The PROGRAM indicator goes out.
* Toll Saver function:
When you set the mode to “0”, the number
of rings tells you if there are any new
voice-messages recorded.
If the unit answers on the 1st ring, there is
at least one new message.
If the unit answers on the 3rd ring, there
are no new messages.
Hang up immediately when you hear the
2nd ring. The 2nd ring indicates there are
no new messages. This will save you toll
charge for the call.
4-6