Panasonic KX-F50

Re-recording an outgoing message
You can change the content of your OGM from a remote telephone.
1 Press “7” to start re-recording.
PRS
After hearing a long beep, speak clearly
and loudly for up to 16 seconds
The new ОСМ is played back to confirm the
change.
3
WXY
When
you
finish,
press
“9”.
|
9
|
Note: If you pause for over 2 seconds while recording, the unit beeps and stops the
OGM recording. In such a case, repeat from step 1 within 10 seconds.
Skipping the OGM for ICM recording
You can leave a message on your unit and without listening to your OGM.
1
Call your unit.
You need not enter your REMOTE TAD ID.
Press "0" while the OGM is playing.
After hearing a long beep, speak clearly and
loudly to leave your message.
3-9