Panasonic KX-F50

System
Programming
Functions
FAX LOGO HEADING
The FAX LOGO HEADING setting
ON: Your LOGO and telephone number
are printed on the transmitted
document. (Default)
OFF: Your LOGO and telephone number
are not printed.
Operation:
1 Press the PROGRAM button.
The PROGRAM indicator lights.
2 Press “#”, then press "05" for the
FAX LOGO HEADING setting.
2 Press “1” or “2”.
(1-ОМ, 2=OFF)
4 Press the SET button to store your
selection in memory.
5 Press the PROGRAM button to end
the operation.
The PROGRAM indicator goes out.
FAX TX SPEED
The FAX TRANSMISSION SPEED setting
The unit can automatically select the
optimum transmitting speed depending on
the line condition and the type of the other
facsimile unit.
9600 BPS: Maximum speed of 9600 bits
per second. (Default)
4800 BPS: Maximum speed of 4800 bits
per second. If you frequently
experience problems such as
transmission errors caused by
poor line condition, set to
"4800 BPS".
Operation:
1 Pressthe PROGRAM button.
The PROGRAM indicator lights.
2 Press “#”, then press “17” for the
FAX TX SPEED setting.
3 Press “1” or "2".
(129600 BPS, 2=4800 BPS)
4 Press the SET button to store your
selection in memory.
5 Press the PROGRAM button to end
the operation.
The PROGRAM indicator goes out.
4-3