Panasonic KX-F50

Programming phone numbers for speed dialing
This unit is equipped with 20 stations (00 through 19), each of which can store a
telephone number for speed dialing. Each phone number can be programmed up to
30 digits long.
Make sure first whether the DIALING MODE selector is set to TONE or PULSE
mode.
1 PROGRAM Press the PROGRAM button.
The PROGRAM indicator lights.
С)
Press
the
AUTO
button,
then
enter
the
station number at 2 digits ("00" through
“197 by using the dial keypad.
Сәжде aj
Enter the phone number.
If you Machete cal a орат in the number,
press the key during programming.
HYPHEN is counted as 2 digits.
Са)
Press the SET button to store the
programming in memory.
To program other phone numbers, repeat steps
2 to 4.
PROGRAM After programming all the numbers,
à press the PROGRAM button to end the
operation.
The PROGRAM indicator goes out.
Note: To correct an error while programming, press the STOP/CLEAR button then
repeat from step 2.
You can print a list of the stored phone numbers. See page 4-2.
1-21