Panasonic KX-F50

Programming your facsimile telephone number
Your facsimile telephone number can be programmed into your unit.
When you transmit a document, your programmed telephone number will be printed
on the top of all pages transmitted from your unit.
The unit can hold your phone number up to 20 digits long.
Program as shown below.
1 PROGRAM Press the PROGRAM button.
The PROGRAM indicator lights.
Press "X", then press "04" for your
telephone number setting.
Enter your telephone number by using
the dial keypad.
Example: If the phone number is "123 4567",
press "123", “%” and “4567”,
If you want to insert a space in a phone number,
press “#”.
To print out your phone number for confirmation
during programming, press the START/COPY
Cx) 0) Cs]
button.
4 SET When you have finished, press the SET
Сх button to store the programming іп
memory.
5 aw Press the PROGRAM button to end the
( 71 operation.
| The PROGRAM indicator goes ош.
Note: To correct an error while programming, press the STOP/CLEAR button then
repeat from step 2.