Panasonic KX-F50

Programming Phone Numbers for
Automatic Dialing
The unit's memory allows you to use both one touch dialing (up to 10 phone
numbers) and speed dialing (up to 20 phone numbers) for rapid access to your
most frequently called numbers.
Programming phone numbers for one touch dialing
This unit is equipped with 10 direct call stations including SECRET and HYPHEN
keys, each of which can store a telephone number for one touch dialing. Each
phone number can be programmed up to 30 digits long.
Make sure first whether the DIALING MODE selector is set to TONE or PULSE
mode.
PROGRAM
БЕЗІН ШЕ
PROGRAM
С)
Ж
vt
Press the PROGRAM button.
The PROGRAM indicator lights.
Press one of the direct call station keys
where you want to store the phone
number.
Enter the phone number by using the
dial keypad.
If you want to insert a hyphen in the number,
press the HYPHEN key during programming.
HYPHEN is counted as 2 digits.
Press the SET button to store the
programming in memory.
To program other phone numbers, repeat steps
2 to 4.
After programming all the numbers,
press the PROGRAM button to end the
operation.
The PROGRAM indicator goes out.
Note: To correct an error while programming, press the STOP/CLEAR button then
repeat from step 2.
You can print a list of the stored phone numbers. See page 4-2.
1-20