Panasonic KX-F50

Resetting the tape for future messages
After listening to the recorded messages, you can reset the tape and record future
messages from the beginning of the tape.
After all the messages have been played back or even while they are being played;
DEF
Press
“3”,
then
hang
up.
The unit rewinds the tape to the beginning.
Future messages will be recorded and the
previously recorded messages are lost.
е
If you have used Memory Playback;
1 Press “3”.
E
3 The unit rewinds the tape to the beginning of the
newly recorded messages, then beeps.
2 ЕР Press “3” again after hearing the beep.
| 3 | The unit rewinds the tape to the beginning of the
previously recorded messages.
b^
If you have reset the tape by mistake;
Press "2" after the tape has been reset.
ABC
2; Опе beep sounds.
The unit advances the tape to the end of the
recorded messages.
Ж
Room monitor
You can monitor the sound in the room where the unit is installed for about
30 seconds.
Press “5” to monitor the room sounds.
| Ex You can hear the room sounds for 30 seconds
after one beep. If you wish to continue
monitoring, press "5" again within 10 seconds
after hearing one beep.
%
3-8