Panasonic KX-F50

FAX RX SPEED
The FAX RECEPTION SPEED setting
The unit can automatically select the
optimum receiving speed depending on
the line condition and the type of the other
facsimile unit.
9600 BPS: Maximum speed of 9600 bits
per second. (Default).
4800 BPS: Maximum speed of 4800 bits
per second. If you frequently
experience problems such as
reception errors caused by
poor line condition, set to
“4800 BPS”,
Operation:
1 Press the PROGRAM button.
The PROGRAM indicator lights.
2 Press “#", then press "18" for the
FAX RX SPEED setting.
3 Press “1” or "2".
(129600 BPS, 2--4800 BPS)
4 Press the SET button to store your
selection in memory.
b Press the PROGRAM button to end
the operation.
The PROGRAM indicator goes out.
4-4
TONE DETECT
The TONE DETECT setting
The unit automatically disconnects the line
when it detects a busy tone after dialing in
on-hook dialing mode.
OFF: The unit does not detect a busy
tone. (Default)
ON: The unit detects a busy tone.
Operation:
1 Pressthe PROGRAM button.
The PROGRAM indicator lights.
2 Press “#”, then press “20” for the
TONE DETECT setting.
3 Press '1" or "2",
(12ON, 2=OFF)
4 Press the SET button to store your
selection in memory.
5 Press the PROGRAM button to end
the operation.
The PROGRAM indicator goes out.