Password for Unlocking
Description Specifies the password for unlocking the unit.
Value Range Null, 4 digits (0–9)
Default Value Not stored.
Configuration File Reference SYS_LOCK_PASSWORD
Missed Call Notification - Message
Description Selects whether to display 'Missed Calls' on the screen in standby
mode.
Note
• This setting is available only when
"NOTIFICATION_MENU_ENABLE" is set to "Y".
Value Range
• Yes
• No
Default Value Yes
Configuration File Reference NOTIFY_MISSEDCALL_ENABLE
Missed Call Notification - LED
Description Selects whether the LED is used to indicate a missed call.
Note
• This setting is available only when
"NOTIFICATION_MENU_ENABLE" is set to "Y".
Value Range
• Yes
• No
Default Value Yes
Configuration File Reference NOTIFY_MISSEDCALL_LED_ENABLE
Voice Message Notification - Message
Description Selects whether to display 'Voice MSG' on the screen in standby
mode.
Note
• This setting is available only when
"NOTIFICATION_MENU_ENABLE" is set to "Y".
Value Range
• Yes
• No
Default Value Yes
Configuration File Reference NOTIFY_VOICEMAIL_ENABLE
4.4.5 Advanced Settings
110 Administrator Guide Document Version: 2017-07