Value Range IPL version ("nn.nnn" [n=0–9])
SIP software version ("[SIP: n.nn]" [n=0–9])
Firmware Version
Description Indicates the version of the firmware that is currently installed on the
unit (reference only).
Value Range Firmware version ("nn.nnn" [n=0–9]) (For KX-HDV130/
KX-HDV330/KX-HDV430)
Bank1 (Bank2): Firmware version ("nn.nnn" [n=0–9]) (For
KX-HDV230)
4.2.2 Network Status
This screen allows you to view the current network information of the unit, such as the MAC address, IP
address, Ethernet port status, etc.
Clicking [Refresh] updates the information displayed on the screen.
4.2.2.1 Network Common
MAC Address
Description Indicates the MAC address of the unit (reference only).
Value Range Not applicable.
Ethernet Link Status
Description Indicates when either the Ethernet LAN port or the Ethernet PC port
is connected (reference only).
Value Range Connected
IP Address Mode
Description Indicates the current IP Address Mode.
4.2.2 Network Status
62 Administrator Guide Document Version: 2017-07
To Next Page
Loading...
