Panasonic KX-HDV130

Value Range
• HTTP/1.0
• HTTP/1.1
Note
• For this unit, it is strongly recommended that you select [HTTP/
1.0]. However, if the HTTP server does not function well with
HTTP/1.0, try changing the setting [HTTP/1.1].
Default Value HTTP/1.0
Configuration File Reference HTTP_VER
HTTP User Agent
Description Specifies the text string to send as the user agent in the header of
HTTP requests.
Value Range Max. 64 characters
Note
• If "{mac}" is included in this parameter, it will be replaced with
the unit’s MAC address in lower-case.
• If "{MAC}" is included in this parameter, it will be replaced with
the unit’s MAC address in upper-case.
• If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
• If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Default Value Panasonic_{MODEL}/{fwver} ({mac})
Configuration File Reference HTTP_USER_AGENT
Authentication ID
Description Specifies the ID for the User account. If set, this name must be
entered to access the Web user interface at the User access level.
Value Range Max. 128 characters
Default Value Not stored.
Configuration File Reference HTTP_AUTH_ID
Authentication Password
Description Specifies the password for the User account. If set, this password
must be entered to access the Web user interface at the User access
level.
Value Range Max. 128 characters
Default Value Not stored.
Configuration File Reference HTTP_AUTH_PASS
4.3.3 HTTP Client Settings
76 Administrator Guide Document Version: 2017-07