Panasonic KX-HDV130 - Ringing Tone; Stutter Tone

4.6.6.3 Ringing Tone
Tone Frequencies
Description Specifies the dual-tone frequencies, in hertz, of ringback tones using
2 whole numbers separated by a comma.
Value Range 0, 200–2000 (0: No tone)
Note
• If the value for this setting is "440,480", the unit will use a
mixed signal of a 440 Hz tone and a 480 Hz tone.
Default Value 440,480
Configuration File Reference RINGBACK_TONE_FRQ
Tone Timings
Description Specifies the pattern, in milliseconds, of ringback tones using up to
10 whole numbers (off 1, on 1, off 2, on 2…) separated by commas.
Note
• It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
Value Range 0–16000 (0: Infinite time)
Note
• Avoid setting 1–50 for any of the values.
Default Value 60,2000,3940
Configuration File Reference RINGBACK_TONE_TIMING
4.6.6.4 Stutter Tone
Tone Frequencies
Description Specifies the dual-tone frequencies, in hertz, of stutter dial tones to
notify that a voice mail is waiting, using 2 whole numbers separated
by a comma.
Value Range 0, 200–2000 (0: No tone)
Note
• If the value for this setting is "350,440", the unit will use a
mixed signal of a 350 Hz tone and a 440 Hz tone.
Default Value 350,440
Configuration File Reference DIAL_TONE4_FRQ
4.6.6 Tone Settings
148 Administrator Guide Document Version: 2017-07