4.3.3.2 Proxy Server
Enable Proxy
Description Selects whether to enable or disable the HTTP proxy feature.
Value Range
• Yes
• No
Default Value No
Configuration File Reference HTTP_PROXY_ENABLE
Proxy Server Address
Description Specifies the IP address or FQDN of the proxy server.
Value Range Max. 256 characters
Default Value Not stored.
Configuration File Reference HTTP_PROXY_ADDR
Proxy Server Port
Description Specifies the port number of the proxy server.
Value Range 1–65535
Default Value 8080
Configuration File Reference HTTP_PROXY_PORT
4.3.4 STUN Settings
This screen allows you to change the STUN Settings.
4.3.4.1 STUN
STUN: Simple Traversal of UDP through NATs
Server Address
Description Specifies the host name or IP address of the STUN server for the
CPE to send Binding Requests.
4.3.4 STUN Settings
Document Version: 2017-07 Administrator Guide 77
To Next Page
Loading...
